dmesg - Intel Xeon E5-2676 v3

Return To Intel Xeon E5-2676 v3 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.1.10-17.31.amzn1.x86_64 (mockbuild@gobi-build-60008) (gcc version 4.8.3 20140911 (Red Hat 4.8.3-9) (GCC) ) #1 SMP Sat Oct 24 01:31:37 UTC 2015
Command line: root=LABEL=/ console=ttyS0 LANG=en_US.UTF-8 KEYTABLE=us
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000efffffff] usable
BIOS-e820: [mem 0x00000000fc000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000020fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Xen HVM domU, BIOS 4.2.amazon 05/06/2015
Hypervisor detected: Xen
Xen version 4.2.
Xen Platform PCI: I/O protocol version 1
Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs.
Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks.
You might have to change the root device
from /dev/hd[a-d] to /dev/xvd[a-d]
in your root= kernel command line option
HVMOP_pagetable_dying not supported
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x210000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF write-combining
  C0000-FFFFF write-back
MTRR variable ranges enabled:
  0 base 0000F0000000 mask 3FFFF8000000 uncachable
  1 base 0000F8000000 mask 3FFFFC000000 uncachable
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
e820: last_pfn = 0xf0000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fbba0-0x000fbbaf] mapped at [ffff8800000fbba0]
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01d9f000, 0x01d9ffff] PGTABLE
BRK [0x01da0000, 0x01da0fff] PGTABLE
BRK [0x01da1000, 0x01da1fff] PGTABLE
init_memory_mapping: [mem 0x20fe00000-0x20fffffff]
 [mem 0x20fe00000-0x20fffffff] page 2M
BRK [0x01da2000, 0x01da2fff] PGTABLE
init_memory_mapping: [mem 0x200000000-0x20fdfffff]
 [mem 0x200000000-0x20fdfffff] page 2M
init_memory_mapping: [mem 0x1e0000000-0x1ffffffff]
 [mem 0x1e0000000-0x1ffffffff] page 2M
BRK [0x01da3000, 0x01da3fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0xefffffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0xefffffff] page 2M
init_memory_mapping: [mem 0x100000000-0x1dfffffff]
 [mem 0x100000000-0x1dfffffff] page 2M
BRK [0x01da4000, 0x01da4fff] PGTABLE
RAMDISK: [mem 0x37248000-0x37feffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000EA020 000024 (v02 Xen   )
ACPI: XSDT 0x00000000FC00F5A0 000054 (v01 Xen    HVM      00000000 HVML 00000000)
ACPI: FACP 0x00000000FC00F260 0000F4 (v04 Xen    HVM      00000000 HVML 00000000)
ACPI: DSDT 0x00000000FC0035E0 00BBF6 (v02 Xen    HVM      00000000 INTL 20090123)
ACPI: FACS 0x00000000FC0035A0 000040
ACPI: FACS 0x00000000FC0035A0 000040
ACPI: APIC 0x00000000FC00F360 0000D8 (v02 Xen    HVM      00000000 HVML 00000000)
ACPI: HPET 0x00000000FC00F4B0 000038 (v01 Xen    HVM      00000000 HVML 00000000)
ACPI: WAET 0x00000000FC00F4F0 000028 (v01 Xen    HVM      00000000 HVML 00000000)
ACPI: SSDT 0x00000000FC00F520 000031 (v02 Xen    HVM      00000000 INTL 20090123)
ACPI: SSDT 0x00000000FC00F560 000031 (v02 Xen    HVM      00000000 INTL 20090123)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000020fffffff]
NODE_DATA(0) allocated [mem 0x20ffd5000-0x20fffafff]
 [ffffea0000000000-ffffea00083fffff] PMD -> [ffff880207600000-ffff88020f5fffff] on node 0
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000020fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009dfff]
  node   0: [mem 0x0000000000100000-0x00000000efffffff]
  node   0: [mem 0x0000000100000000-0x000000020fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000020fffffff]
On node 0 totalpages: 2097053
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 15296 pages used for memmap
  DMA32 zone: 978944 pages, LIFO batch:31
  Normal zone: 17408 pages used for memmap
  Normal zone: 1114112 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xb008
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 15 CPUs, 13 hotplug CPUs
e820: [mem 0xf0000000-0xfbffffff] available for PCI devices
Booting paravirtualized kernel on Xen HVM
clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:15 nr_node_ids:1
PERCPU: Embedded 32 pages/cpu @ffff88020fc00000 s93976 r8192 d28904 u131072
pcpu-alloc: s93976 r8192 d28904 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 -- 
xen: PV spinlocks enabled
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2064264
Policy zone: Normal
Kernel command line: root=LABEL=/ console=ttyS0 LANG=en_US.UTF-8 KEYTABLE=us
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Memory: 8160708K/8388212K available (5017K kernel code, 947K rwdata, 2324K rodata, 1148K init, 1580K bss, 227504K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=15, Nodes=1
Hierarchical RCU implementation.
	Additional per-CPU info printed with stalls.
	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=15.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=15
NR_IRQS:8448 nr_irqs:952 16
xen:events: Using 2-level ABI
xen:events: Xen HVM callback vector for event delivery is enabled
Console: colour VGA+ 80x25
Cannot get hvm parameter CONSOLE_EVTCHN (18): -22!
console [ttyS0] enabled
clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 30580167144 ns
hpet clockevent registered
tsc: Detected 2400.034 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.06 BogoMIPS (lpj=9600136)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150410
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
mce: CPU supports 2 MCE banks
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 20K (ffffffff81c0d000 - ffffffff81c12000)
ftrace: allocating 19908 entries in 78 pages
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
clocksource xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2676 v3 @ 2.40GHz (fam: 06, model: 3f, stepping: 02)
cpu 0 spinlock event irq 53
Performance Events: unsupported p6 CPU model 63 no PMU driver, software events only.
installing Xen timer for CPU 1
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1cpu 1 spinlock event irq 59
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (9600.13 BogoMIPS)
devtmpfs: initialized
clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
xen: --> pirq=16 -> irq=9 (gsi=9)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
acpiphp: Slot [0] registered
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfbffffff window]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
pci 0000:00:01.1: reg 0x20: [io  0xc100-0xc10f]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf1ffffff pref]
pci 0000:00:02.0: reg 0x14: [mem 0xf3008000-0xf3008fff]
pci 0000:00:03.0: [8086:10ed] type 00 class 0x020000
pci 0000:00:03.0: reg 0x10: [mem 0xf3000000-0xf3003fff 64bit pref]
pci 0000:00:03.0: reg 0x1c: [mem 0xf3004000-0xf3007fff 64bit pref]
pci 0000:00:1f.0: [5853:0001] type 00 class 0xff8000
pci 0000:00:1f.0: reg 0x10: [io  0xc000-0xc0ff]
pci 0000:00:1f.0: reg 0x14: [mem 0xf2000000-0xf2ffffff pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
ACPI: Enabled 2 GPEs in block 00 to 0F
xen:balloon: Initialising balloon driver
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 62.500000 MHz counter
Switched to clocksource xen
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io  0x08a0-0x08a3] has been reserved
system 00:01: [io  0x0cc0-0x0ccf] has been reserved
system 00:01: [io  0x04d0-0x04d1] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
xen: --> pirq=17 -> irq=8 (gsi=8)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
xen: --> pirq=18 -> irq=12 (gsi=12)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
xen: --> pirq=19 -> irq=1 (gsi=1)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
xen: --> pirq=20 -> irq=6 (gsi=6)
pnp 00:05: [dma 2]
pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
xen: --> pirq=21 -> irq=4 (gsi=4)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: [io  0x10c0-0x1141] has been reserved
system 00:07: [io  0xb044-0xb047] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfbffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 13984K (ffff880037248000 - ffff880037ff0000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xec000000-0xf0000000] (64MB) mapped at [ffff8800ec000000-ffff8800efffffff]
RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 655360 ms ovfl timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-16 Joules
futex hash table entries: 4096 (order: 6, 262144 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1446538199.276:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
alg: No test for stdrng (krng)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
intel_idle: does not run on family 6 model 63
xen: --> pirq=22 -> irq=47 (gsi=47)
xen:grant_table: Grant tables using version 1 layout
Grant table initialized
Cannot get hvm parameter CONSOLE_EVTCHN (18): -22!
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
xen_netfront: Initialising Xen virtual ethernet driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
blkfront: xvda: barrier or flush: disabled; persistent grants: enabled; indirect descriptors: enabled;
hidraw: raw HID events driver (C) Jiri Kosina
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 9d37a492f68fb9db6801f0aba1738ad0857b42a2'
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
 xvda: xvda1
xenbus_probe_frontend: Device with no driver: device/vfb/0
xenbus_probe_frontend: Device with no driver: device/pci/0
Freeing unused kernel memory: 1148K (ffffffff81aee000 - ffffffff81c0d000)
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1116K (ffff8800014e9000 - ffff880001600000)
Freeing unused kernel memory: 1772K (ffff880001845000 - ffff880001a00000)
dm_mod: module verification failed: signature and/or required key missing - tainting kernel
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
udevd[787]: starting version 173
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:01.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc100 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc108 irq 15
EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null)
dracut: Remounting /dev/disk/by-label/\x2f with -o noatime,ro
EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null)
dracut: Mounted root filesystem /dev/xvda1
dracut: Loading SELinux policy
tsc: Refined TSC clocksource calibration: 2399.998 MHz
clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x229835b7123, max_idle_ns: 440795242976 ns
dracut: /sbin/load_policy: Can't load policy: No such device
dracut: Switching root
random: init urandom read with 110 bits of entropy available
random: nonblocking pool is initialized
udevd[1578]: starting version 173
ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.14.2+amzn
Copyright (c) 2009-2014 Intel Corporation.
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input3
ACPI: Sleep Button [SLPF]
evbug: Connected device: input0 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
evbug: Connected device: input2 (Power Button at LNXPWRBN/button/input0)
evbug: Connected device: input3 (Sleep Button at LNXSLPBN/button/input0)
ixgbevf: eth%d: ixgbevf_check_options: dynamic interrupt throttling enabled
ixgbevf 0000:00:03.0: Multiqueue Enabled: Rx Queue count = 2, Tx Queue count = 2
ixgbevf: eth0: ixgbevf_probe: Intel(R) 82599 Virtual Function
02:ee:21:87:3d:19
ixgbevf: eth0: ixgbevf_probe: GRO is enabled
ixgbevf: eth0: ixgbevf_probe: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver
piix4_smbus 0000:00:01.3: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
evbug: Connected device: input4 (ImExPS/2 Generic Explorer Mouse at isa0060/serio1/input0)
EXT4-fs (xvda1): re-mounted. Opts: (null)
NET: Registered protocol family 10
ixgbevf 0000:00:03.0: NIC Link is Up 10 Gbps
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ixgbevf: eth0: ixgbevf_change_mtu: changing MTU from 1500 to 9001
audit: type=1305 audit(1446538210.944:2): audit_pid=2102 old=0 auid=4294967295 ses=4294967295 res=1
crafty[13830]: segfault at 0 ip 00007ff9b24c2070 sp 00007ffcad5fb798 error 4 in libc-2.17.so[7ff9b244e000+1b7000]
crafty[13833]: segfault at 0 ip 00007fe6b61f6070 sp 00007ffdac35f3e8 error 4 in libc-2.17.so[7fe6b6182000+1b7000]
crafty[13836]: segfault at 0 ip 00007f7805092070 sp 00007fff462ff2d8 error 4 in libc-2.17.so[7f780501e000+1b7000]
python (30500): drop_caches: 3
python (30500): drop_caches: 3
python (30538): drop_caches: 3
python (30538): drop_caches: 3
python (30547): drop_caches: 3
python (30547): drop_caches: 3

Return To Intel Xeon E5-2676 v3 System Information